2004

LEDcheck™ Installation Operation Manual A756595-A , updated May 2004

Design for Testability Guidelines, by Gary St. Onge, updated October 2004

2000

The Continued Evolution of Test Data Transfer Format IPC-D-356, The Board Authority, September, 2000

An Interview with Duane Delfosse, The Board Authority, September 2000

Adding 3D to Board Stress Analysis, by Gary St. Onge and Tom Newhall, August 2000

The Hidden Cost of Board Stress in Test, by Steve Green May 2000.

Laminated Chip Carrier Testing by Raymond P. Cronin. PCFab, February 2000

1999
A True Test of Chip Carrier Subtrates by Raymond P. Cronin. As seen in HDI, June 1999

ESH 2.7 - Printed Circuit Board Material for ATE

Performance Boards

ESH PCB Trace Options Technical Note

Datamanagement in The Bare Board Test Environment, The Board Authority, March

An Interview with Toni Bernard, The Board Authority, March

An Interview with David Wilkie, The Board Authority, March

Adaptive Measuring, by Manfred Prokop

1998
Wireless Test Fixture Considerations, by Gary St. Onge and Jeff Sendzicki

1997
Bare Board Testing, by Philip J. Hallee

1996
Automating E.T., by Bud Fabian

Testing High-Tech PCBs, by Philip J. Hallee -May

1995
Increased Test Yields Through the Reduction of Board Flex, compiled by Rich Rivas

1994
Bare-Board Test Spec Paves Way To Successful Loaded Boards by Joseph E. Burns -January

Practical Considerations For Electrical Test of Bare PCBs From A Specifier Perspective, by David Wilkie -September

1993
To Get Good Fixtures, Supply CAD Data, by Joseph Burns - August

1988
Fixturing Advances, by Gary St. Onge - December

1987
Meeting the Challenge of ESD at the Test Fixture, by Gary F. St. Onge - September

For further information on copies contact
Jessica Ferguson at jessica.ferguson@ectinfo.com