µHPC/GA Contactors Electrical

 

 
  • ECT µHPC/GA contactors achieve optimum electrical performance by creating the shortest possible path through the contactor, while minimizing signal distortion and power and ground source impedance, assuring optimal production test yields.
  • Capacitance, inductance and DC resistance are kept low by making the path as short, wide and conductive as possible.
  • The electrical path through the contactor is very short - about 3.5mm (0.140").
  • Contact resistance is minimized by having all of the components of the electrical path gold plated, and by maximizing the contact area between the contact lead and the DUT contact surface.
  • The density of the SMM wire matrix ensures that the SMM touches the contact element and the interface board pad with a large number of conductors, reducing the contact resistance at these points.

 
©1998-2003 Everett Charles Technologies. All rights reserved. Everett Charles Technologies, 700 E. Harrison Ave., Pomona, CA, 91767, U.S.A.